Cisco ASR 9010 Installation Guide

Field Replaceable Units
In the Cisco ASR 9006 Router, Cisco ASR 9010 Router, and Cisco ASR 9904 Router, the following components
are field replaceable units (FRU):
• All line cards
• RSP cards
• Power modules
• Fan trays
• Air filters
• Line card and RSP blank fillers
• Compact flash disk
• Gigabit Ethernet small form-factor pluggable (SFP) transceiver modules
• 10-Gigabit Ethernet small form-factor pluggable (SFP+) transceiver modules
• 10-Gigabit Ethernet small form-factor pluggable (XFP) transceiver modules
• Optional card cage doors (Cisco ASR 9010 Router only)
The backplane is not field-replaceable.
Note
In the Cisco ASR 9906 Router, Cisco ASR 9910 Router, Cisco ASR 9912 Router, and Cisco ASR 9922
Router, the following components are FRUs:
• All line cards
• RP cards
• RSP cards (only for Cisco ASR 9906 Router and Cisco ASR 9910 Router)
• Fabric cards
• Power modules
• Fan trays and covers
• Air filters
• Foam media (only for Cisco ASR 9922 Router, Cisco ASR 9912 Router)
• Blank line card fillers
• Gigabit Ethernet small form-factor pluggable (SFP) transceiver modules
• 10-Gigabit Ethernet small form-factor pluggable (SFP+) transceiver modules
• 100-Gigabit Ethernet small form-factor pluggable (CFP) transceiver modules
• Optional card cage doors
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
222
Replacing Cisco ASR 9000 Series Router Components
Field Replaceable Units

Cisco ASR 9010 Specifications

General

Chassis	Modular
Rack Units	21 RU
Operating System	Cisco IOS XR
Form Factor	Rack-mountable
Number of Slots	10
Power Supply	AC or DC
Redundancy	Yes
Slots	8 line card slots, 2 route switch processor slots
Memory	16 GB DRAM
Storage	64 GB SSD (Route Processor)
Port Types	Ethernet, OTN
Redundancy Features	Route Processor, Power Supply, Fan Tray
Operating Temperature	32 to 104°F (0 to 40°C)
Humidity	5% to 90% non-condensing
Route Processor	Cisco ASR 9000 Series Route Switch Processor