Cisco ASR 9010 Installation Guide

Figure 72: Unpacking the Cisco ASR 9912 Router from the Shipping Container and Pallet
Foam packaging material4Straps1
Cardboard packaging
container
5Shipping pallet2
Top cardboard packaging
cap
6Hold-down brackets and
screws
3
Step 4 Remove components, such as line cards and the fan tray, to reduce the weight before lifting or moving the
chassis. See Removing Components Before Installing the Chassis, on page 74 for more information.
Step 5 Save the packaging materials in case the router needs repackaging or shipping.
Unpacking the Cisco ASR 9922 Router
Follow these steps to unpack the Cisco ASR 9922 Router from its wooden shipping container.
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
68
Unpacking and Installing the Chassis
Unpacking the Cisco ASR 9922 Router

Cisco ASR 9010 Specifications

General

Chassis	Modular
Rack Units	21 RU
Operating System	Cisco IOS XR
Form Factor	Rack-mountable
Number of Slots	10
Power Supply	AC or DC
Redundancy	Yes
Slots	8 line card slots, 2 route switch processor slots
Memory	16 GB DRAM
Storage	64 GB SSD (Route Processor)
Port Types	Ethernet, OTN
Redundancy Features	Route Processor, Power Supply, Fan Tray
Operating Temperature	32 to 104°F (0 to 40°C)
Humidity	5% to 90% non-condensing
Route Processor	Cisco ASR 9000 Series Route Switch Processor