Cisco ASR 9010 Installation Guide

Unpacking the Cisco ASR 9904 Router
Follow these steps to unpack the Cisco ASR 9904 Router from its wooden shipping container.
Procedure
Step 1 Cut the straps that secure the cardboard shipping container to the pallet.
Step 2 Remove the corrugated top shipping container.
Step 3 Remove the accessories and corrugated packing accessory tray.
Step 4 Remove the packing material (see the figure below).
a) Remove the foam packaging material from the top of the router.
b) Remove the plastic covering from the router and remove it from the bottom foam.
Figure 69: Unpacking the Cisco ASR 9904 Router from the Shipping Container and Pallet
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
61
Unpacking and Installing the Chassis
Unpacking the Cisco ASR 9904 Router

Cisco ASR 9010 Specifications

General

Chassis	Modular
Rack Units	21 RU
Operating System	Cisco IOS XR
Form Factor	Rack-mountable
Number of Slots	10
Power Supply	AC or DC
Redundancy	Yes
Slots	8 line card slots, 2 route switch processor slots
Memory	16 GB DRAM
Storage	64 GB SSD (Route Processor)
Port Types	Ethernet, OTN
Redundancy Features	Route Processor, Power Supply, Fan Tray
Operating Temperature	32 to 104°F (0 to 40°C)
Humidity	5% to 90% non-condensing
Route Processor	Cisco ASR 9000 Series Route Switch Processor