Cisco ASR 9010 Installation Guide

Figure 169: Installing a Version 2 or Version 3 Power Module in the Cisco ASR 9010, 9912, 9922 Routers
Figure 170: Installing a Version 2 Power Module in the Cisco ASR 9904 Router
Installing DC Power Modules
Required Tools and Equipment
You need the following tool to perform this task:
• 7/16 hex socket and torque wrench, torque 50 in-lb.
Steps
Follow these steps to reinstall the DC power modules back into the chassis (see Figure 168: Installing a Version
1 Power- Module, on page 160 for the version 1 power module or Figure 169: Installing a Version 2 or Version
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
161
Installing Cards and Modules in the Chassis
Installing DC Power Modules

Cisco ASR 9010 Specifications

General

Chassis	Modular
Rack Units	21 RU
Operating System	Cisco IOS XR
Form Factor	Rack-mountable
Number of Slots	10
Power Supply	AC or DC
Redundancy	Yes
Slots	8 line card slots, 2 route switch processor slots
Memory	16 GB DRAM
Storage	64 GB SSD (Route Processor)
Port Types	Ethernet, OTN
Redundancy Features	Route Processor, Power Supply, Fan Tray
Operating Temperature	32 to 104°F (0 to 40°C)
Humidity	5% to 90% non-condensing
Route Processor	Cisco ASR 9000 Series Route Switch Processor