Cisco ASR 9010 Installation Guide

Reference IllustrationPlug RatingLengthPart NumberLocale
Figure 46: AC Power Cord PWR-CAB-AC-SA=,
on page 37
16 A, 250 V13.9 ft (4.3 m)PWR-CAB-AC-SA=South Africa
Figure 47: AC Power Cord PWR-CAB-AC-UK=,
on page 37
16 A, 250 V13.9 ft (4.3 m)PWR-CAB-AC-UK=UK
Figure 48: AC Power Cord PWR-CAB-AC-SUI=
, on page 37
16 A, 250 V13.9 ft (4.3 m)PWR-CAB-AC-SUI=Switzerland
Figure 49: AC Power Cord PWR-CAB-AC-JPN=
, on page 38
20 A, 250 V13.9 ft (4.3 m)PWR-CAB-AC-JPN=Japan
AC Power Cord Illustrations (Version 1 Power)
This section contains the AC power cord illustrations for version 1 power, as described in Table 3: AC Input
Power Cord Options for Version 1 Power System, on page 28. Note that an AC power cord may be used with
several power supplies.
Figure 26: AC Power Cord CAB-7513ACA=
Figure 27: AC Power Cord CAB-AC-16A-AUS
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
30
Preparing for Installation
AC Power Cord Illustrations (Version 1 Power)

Cisco ASR 9010 Specifications

General

Chassis	Modular
Rack Units	21 RU
Operating System	Cisco IOS XR
Form Factor	Rack-mountable
Number of Slots	10
Power Supply	AC or DC
Redundancy	Yes
Slots	8 line card slots, 2 route switch processor slots
Memory	16 GB DRAM
Storage	64 GB SSD (Route Processor)
Port Types	Ethernet, OTN
Redundancy Features	Route Processor, Power Supply, Fan Tray
Operating Temperature	32 to 104°F (0 to 40°C)
Humidity	5% to 90% non-condensing
Route Processor	Cisco ASR 9000 Series Route Switch Processor