Cisco ASR 9010 Installation Guide

Figure 15: Cisco ASR 9910 Router Mounted in a 2-Post Rack
Open 4-Post Rack
Item b in Figure 10: Telco-Type Equipment Racks, on page 10 shows a free-standing, 4-post open rack with
two mounting posts in the front and two mounting posts in the back or along the side. The mounting posts in
this type of rack are often adjustable so that you can position the rack-mounted unit within the depth of the
rack rather than flush-mount it with the front of the rack.
• Two rear mounting brackets are provided for mounting the Cisco ASR 9906 Router and Cisco ASR 9010
Router in a 4-post rack.
• Two rear mounting brackets and two bottom guide rails are provided for mounting the Cisco ASR 9922
Router and Cisco ASR 9912 Router in a 4-post rack.
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
14
Preparing for Installation
Open 4-Post Rack

Cisco ASR 9010 Specifications

General

Chassis	Modular
Rack Units	21 RU
Operating System	Cisco IOS XR
Form Factor	Rack-mountable
Number of Slots	10
Power Supply	AC or DC
Redundancy	Yes
Slots	8 line card slots, 2 route switch processor slots
Memory	16 GB DRAM
Storage	64 GB SSD (Route Processor)
Port Types	Ethernet, OTN
Redundancy Features	Route Processor, Power Supply, Fan Tray
Operating Temperature	32 to 104°F (0 to 40°C)
Humidity	5% to 90% non-condensing
Route Processor	Cisco ASR 9000 Series Route Switch Processor