Cisco ASR 9010 Installation Guide

Figure 70: Unpacking the Cisco ASR 9906 Router from the Shipping Container and Pallet
Shipping pallet5Straps1
Hold-down bracket and
screws
6Connecting clips2
Cardboard accessory tray
and chassis accessories
7Top cardboard packaging
cap
3
Cardboard packaging
container
8Foam packaging material4
Step 6 Remove components, such as line cards, power supplies, and the fan tray, to reduce the weight before lifting
or moving the chassis. See Removing Components Before Installing the Chassis, on page 74 for more
information.
Step 7 Save the packaging materials in case the router needs repackaging or shipping.
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
63
Unpacking and Installing the Chassis
Unpacking the Cisco ASR 9906 Router

Cisco ASR 9010 Specifications

General

Chassis	Modular
Rack Units	21 RU
Operating System	Cisco IOS XR
Form Factor	Rack-mountable
Number of Slots	10
Power Supply	AC or DC
Redundancy	Yes
Slots	8 line card slots, 2 route switch processor slots
Memory	16 GB DRAM
Storage	64 GB SSD (Route Processor)
Port Types	Ethernet, OTN
Redundancy Features	Route Processor, Power Supply, Fan Tray
Operating Temperature	32 to 104°F (0 to 40°C)
Humidity	5% to 90% non-condensing
Route Processor	Cisco ASR 9000 Series Route Switch Processor