Cisco ATA 190 User Manual

Contents
iv
Cisco ATA 190 Analog Telephone Adaptor Administration Guide for SIP (Version 1.0)
OL-31821-01
Installing the ATA 190 3-1
Cisco ATA Rear Panel Connections 3-1
Network Requirements 3-1
Safety Recommendations 3-1
What the ATA 190 Package Includes 3-2
Installing the ATA 190 3-2
Attaching a Phone to the ATA 190 3-3
Verifying the ATA 190 Startup Process 3-3
Configuring Startup Network Settings 3-3
Configuring Security on the ATA 190 3-3
Configuring the ATA 190 4-1
Telephony Features Available for the ATA 190 4-1
Configuring Product Specific Configuration Parameters 4-4
Adding Users to Cisco Unified Communications Manager 4-6
Configuring Fax Services 5-1
Using Fax Mode 5-1
Fax Modem Standards 5-1
Fax Modem Speeds 5-2
Using SIP Supplementary Services 6-1
Common Supplementary Services 6-1
Attended Transfer 6-2
Call Pickup 6-2
Caller ID 6-2
Call-Waiting Caller ID 6-2
Call Hold 6-2
Group Call Pickup 6-3
Meet–Me Conference 6-3
Privacy 6-3
Shared Line 6-3
Speed Dial 6-4
Redial 6-4
Unattended Transfer 6-4
Semi-unattended Transfer 6-4
Fully Unattended Transfer (Blind Transfer) 6-4
Voice Mail Indication 6-5

Cisco ATA 190 Specifications

General

Ports	2 FXS ports
Operating Temperature	32 to 104°F (0 to 40°C)
Network Interface	10/100BASE-T Ethernet
Protocol Support	SIP
Power Supply	5V DC
Voice Codecs	G.711a, G.711u, G.729a, G.729ab
Relative Humidity	10 to 90% noncondensing