Cisco ATA 190 User Manual

Contents
v
Cisco ATA 190 Analog Telephone Adaptor Administration Guide for SIP (Version 1.0)
OL-31821-01
Voice-Messaging System 6-5
Making a Conference Call in the United States 6-5
Making a Conference Call in Sweden 6-5
Call Waiting in the United States 6-6
Call Waiting in Sweden 6-6
About Call Forwarding 6-6
Call Forwarding in the United States 6-6
Call Forwarding in Sweden 6-6
ATA 190 Specifications A-1
Physical Specifications A-1
Electrical Specifications A-2
Environmental Specifications A-2
Physical Interfaces A-3
Ringing Characteristics A-3
Software Specifications A-3
SIP Compliance Reference Information A-4
Voice Menu Codes B-1
Accessing the IVR and Configuring Your Phone Setting B-1
Recommended ATA 190 Tone Parameter Values by Country C-1
Troubleshooting and Maintenance D-1
Resolving Startup Problems D-1
Symptom: The ATA 190 Does Not Go Through its Normal Startup Process D-1
Symptom: The ATA 190 Does Not Register with Cisco Unified Communications Manager D-2
Checking Network Connectivity D-2
Verifying TFTP Server Settings D-2
Verifying DNS Settings D-3
Verifying Cisco Unified Communications Manager Settings D-3
Cisco Unified Communications Manager and TFTP Services Are Not Running D-3
Creating a New Configuration File D-3
Registering the Phone with Cisco Unified Communications Manager D-4
Symptom: ATA 190 Unable to Obtain IP Address D-4
ATA 190 Resets Unexpectedly D-5
Verifying Physical Connection D-5

Cisco ATA 190 Specifications

General

Ports	2 FXS ports
Operating Temperature	32 to 104°F (0 to 40°C)
Network Interface	10/100BASE-T Ethernet
Protocol Support	SIP
Power Supply	5V DC
Voice Codecs	G.711a, G.711u, G.729a, G.729ab
Relative Humidity	10 to 90% noncondensing