Cisco ATA 190 User Manual

B-2
Cisco ATA 190 Analog Telephone Adaptor Administration Guide for SIP (Version 1.0)
OL-31821-01
Chapter B Voice Menu Codes
Configure subnet mask 121 Availaible in static ip mode only
Show default gateway 130
Configure default gateway 131 Availaible in static ip mode only
Show TFTP server address 220
Configure TFTP server address 221
Show LAN mode 100 Value 0 for DHCP and 1 for static IP
Configure LAN mode 101 Value 0 for DHCP and 1 for static IP
Show VLAN 230
Configure VLAN 231 To disable VLAN—Set VLAN id to 4095
To enable VLAN—Set VLAN id from 1 to 4094
Factory Reset 73738
Table B-1 Navigating the IVR Configuration Menu (continued)
Action IVR Code Navigating Notes

Cisco ATA 190 Specifications

General

Ports	2 FXS ports
Operating Temperature	32 to 104°F (0 to 40°C)
Network Interface	10/100BASE-T Ethernet
Protocol Support	SIP
Power Supply	5V DC
Voice Codecs	G.711a, G.711u, G.729a, G.729ab
Relative Humidity	10 to 90% noncondensing