Cisco ATA 190 - Recommended ATA 190 Tone Parameter Values by Country; Australia; Germany

C-1
Cisco ATA 190 Analog Telephone Adaptor Administration Guide for SIP (Version 1.0)
OL-31821-01
APPENDIX
C
Recommended ATA 190 Tone Parameter Values
by Country
This section provides tables of recommended tone parameters for the followings countries, listed
alphabetically:
Note The extended tone format used by some countries is available with ATA 190 firmware version 9.0(3).
• Australia
• Germany
• Italy
• New Zealand
• United States
Ta b l e C-1 Australia
Parameter Recommended Values
DialTone 2,31163,30958,1477,1566,1,0,0,0
BusyTone 1,30958,0,2212,0,0,3000,3000,0
ReorderTone 1,31163,0,2086,0,0,3000,3000,0
RingbackTone 102,31163,1477,30742,1654,2,3200,1600,3200,16000,0
SITTone 1,30958,0,2212,0,0,20000,4000,0
Ta b l e C-2 Germany
Parameter Recommended Values
DialTone 1,30958,0,3125,0,1,0,0,0
BusyTone 1,30958,0,1757,0,0,3840,3840,0
ReorderTone 1,30958,0,1757,0,0,1920,1920,0
RingbackTone 1,30958,0,1971,0,0,8000,32000,0
SITTone 1,30958,0,1757,0,0,1920,1920,0