Cisco Catalyst 4500e Series User Manual

Contents
vi
Catalyst 4500 E-Series Switches Installation Guide
OL-13972-01
Boot Problems 5-17
Contacting the Cisco Technical Assistance Center 5-18
Serial Numbers 5-19
APPENDIX A Specifications A-1
Catalyst 4503-E Switch Specifications A-1
Catalyst 4506-E Switch Specifications A-2
Catalyst 4507R-E Switch Specifications A-3
Catalyst 4510R-E Switch Specifications A-5
Catalyst 4500 Power Supplies A-6
APPENDIX B Repacking a Switch B-1
APPENDIX C Initial Configuration for the Switch C-1
Connecting to the Switch C-2
Starting the Terminal-Emulation Software C-2
Connecting to a Power Source C-2
Entering the Initial Configuration Information C-3
IP Settings C-3
Performing the Initial Configuration C-3
APPENDIX D Module Overview and Specifications D-1
Catalyst 4500 Series Switches D-1
Catalyst 4500 E-Series Switches D-1
Supervisor Engines D-1
Front-Panel Components D-3
Ethernet Management Port D-4
Console Port D-4
Supervisor Memory D-4
Switching Modules D-4
WS-X4606-X2-E D-5
WS-X4648-RJ45V-E D-5
WS-X4648-RJ45V+E D-6
Switching Module LEDs D-7
Hot-Swapping Feature D-8
I NDEX

Cisco Catalyst 4500e Series Specifications

General

Series	Catalyst 4500E Series
Stackable	No
Chassis Options	3-slot, 6-slot, 7-slot, 10-slot
Power Supply Options	AC, DC
Redundancy	Power supply redundancy, supervisor engine redundancy (1+1)
Layer Support	Layer 2
Virtualization	Yes (Virtual Switching System - VSS)
Form Factor	Modular
Ports	Gigabit Ethernet, 10 Gigabit Ethernet, 40 Gigabit Ethernet, and 100 Gigabit Ethernet options depending on the line cards
Jumbo Frame Support	Yes
Features	Flexible NetFlow, TrustSec
Maximum Port Density	Up to 384 ports per chassis
Operating System	Cisco IOS XE
Management	CLI, SNMP, Cisco Prime Infrastructure, Cisco DNA Center
Security Features	802.1X
VLAN Support	Up to 4096 VLANs
QoS Support	Yes
Supervisor Engine Options	Sup8-E