Name: Cisco Catalyst 4500e Series
Brand: Cisco
Rating: 5 (1 reviews)

To Next Page

To Previous Page

viii

Catalyst 4500 E-Series Switches Installation Guide

OL-13972-01

Preface

Related Documentation

Refer to the fo llow ing docum ents fo r additional Catalyst 4500 series and Catalyst 4500 E-series

information:

• Catalyst 4500 Series Module Installation Guide at

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/hardware/module/guide/

mod_inst.html

for information about individual switching modules and supervisors not discussed in this

publication.

• Regulatory Compliance and Safety Information for the Catalyst 4500 Series Switches at

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/hardware/regulatory/compliance/

78_13233.html

• The release note appropriate to your software version. Release notes are at:

http://www.cisco.com/en/US/products/hw/switches/ps4324/prod_release_notes_list.html

• The software configuration guide appropriate to your software version. Software configuration

guides are at:

http://www.cisco.com/en/US/products/hw/switches/ps4324/products_installation_and_configurati

on_guides_list.html

• The command reference appropriate to your software version. Command references are at:

http://www.cisco.com/en/US/products/hw/switches/ps4324/prod_command_reference_list.html

• The system message guide appropriate to your software version. System message guides are at:

http://www.cisco.com/en/US/products/hw/switches/ps4324/products_system_message_guides_list

.html

• There are a number of installation notes and technical tips available for this switch. The top level

Catalyst 4500 and Catalyst 4500-E documentation and technical support page is at

http://www.cisco.com/en/US/products/hw/switches/ps4324/tsd_products_support_

series_home.html

Conventions

This docum ent uses the fo llow ing conventions:

A ppendix C In itial C onfiguration

fo r the Sw itch

Provides a very minimal configuration. For fu ll

configuration of features and interfaces, refer to the

software configuration guide for your software release.

A ppendix D Module Overview and

Specifications

Provides specifications and other information about the

Catalyst 4500 E-series sw itching m odules.

Chapter Title Description

Convention Description

boldface font C om m ands and keyw ords are in boldface.

italic font Argum ents for which you supply values are in italics.

[ ] Elem ents in squ are brackets are optional.

Questions and Answers:

Need help?

Do you have a question about the Cisco Catalyst 4500e Series and is the answer not in the manual?

Cisco Catalyst 4500e Series Specifications

General

Series	Catalyst 4500E Series
Stackable	No
Chassis Options	3-slot, 6-slot, 7-slot, 10-slot
Power Supply Options	AC, DC
Redundancy	Power supply redundancy, supervisor engine redundancy (1+1)
Layer Support	Layer 2
Virtualization	Yes (Virtual Switching System - VSS)
Form Factor	Modular
Ports	Gigabit Ethernet, 10 Gigabit Ethernet, 40 Gigabit Ethernet, and 100 Gigabit Ethernet options depending on the line cards
Jumbo Frame Support	Yes
Features	Flexible NetFlow, TrustSec
Maximum Port Density	Up to 384 ports per chassis
Operating System	Cisco IOS XE
Management	CLI, SNMP, Cisco Prime Infrastructure, Cisco DNA Center
Security Features	802.1X
VLAN Support	Up to 4096 VLANs
QoS Support	Yes
Supervisor Engine Options	Sup8-E