Cisco Catalyst 6800 - 10-Gigabit Ethernet Module Specifications

DC Heat
Diss.
(BTU/HR)
DC-Input
Power
(Watts)
AC Heat
Diss.
(BTU/HR)
AC-Input
Power
(Watts)
Module
Power
(Watts)
Module
Current
(Amps)
5
Switch Model + DFC Card
1157.944339.361157.944339.36339.368.080Cisco Catalyst 6500-E
Series Switch
(C6800-48P-SFP-XL +
WS-F6K-DFC4-AXL)
5
On the Catalyst 6807-XL switch, module current is @ 52V and on a Catalyst 6500-E Series switch, module current is @ 42V.
Related Topics
Installing an Ethernet Switching Module, on page 25
C6800-48P-SFP and C6800-48P-SFP-XL Ethernet Modules, on page 4
10-Gigabit Ethernet Module Specifications
C6800-8P10G and C6800-8P10G-XL Module Specifications
The following table lists the physical specifications of the modules:
Table 12: Physical Specifications
SpecificationItem
1.73 x 15.4 x 16.4 inches (4.39 x 39.11 x 41.65 cm)Dimensions (H x W x D)
11.02 lb (5.0 kg)Weight
The following table lists the environmental specifications of the modules:
Table 13: Environmental Specifications
SpecificationItem
Certified for operation: 32° to 104°F (0° to 40°C)
Designed and tested for operation: 32° to 130°F (0° to 55°C)
Operating temperature
10 to 90 percentHumidity (RH) ambient (noncondensing)
Certified for operation: 0 to 6500 ft (0 to 2000 m)
Designed and tested for operation: -200 to 10,000 ft (-60 to
3000 m)
Operating altitude
Catalyst 6800 Ethernet Module Installation Guide
40
Module Specifications
10-Gigabit Ethernet Module Specifications