Need help?Do you have a question about the Cisco Catalyst 6800 and is the answer not in the manual?
Explains the conventions used in the document for formatting, symbols, and typographical cues.
Lists other Cisco documentation relevant to the installation guide, including release notes.
Provides instructions on how to access Cisco documentation and submit service requests.
Details specifications and features of 10/100/1000 Mbps copper Ethernet modules.
Describes the 1-Gbps pluggable Ethernet modules, including their specifications and port types.
Provides an overview of 10-Gbps pluggable Ethernet modules and their capabilities.
Highlights critical safety precautions and warnings applicable to equipment installation procedures.
Details methods and guidelines to prevent damage to electronic components from electrostatic discharge (ESD).
Provides step-by-step instructions on how to properly ground the system for safety and operational integrity.
Covers the comprehensive procedure for installing and removing Ethernet switching modules from the chassis.
Explains how to install pluggable transceivers into module port sockets and connect module connectors.
Details the process of connecting network interface cables, including optical and copper types.
Lists the physical, environmental, and power specifications for 10/100/1000 Ethernet modules.
Outlines the physical, environmental, and power specifications for 1-Gigabit Ethernet modules.
Lists the physical, environmental, and power specifications for 10-Gigabit Ethernet modules.
Explains the status, ID, and port link LEDs on the Ethernet module front panels and their meanings.
Briefly describes the types of pluggable transceivers supported by modules and supervisor engines.
Provides brief descriptions of the module connectors supported by the switch.
To Next Page
General
