Cisco Catalyst 9300 Series Hardware Installation Guide

Table 46: AC Power Cords for PWR-C1-1100WAC, PWR-C1-715WAC, PWC-C1-350WAC, PWR-C1-1100WAC-P, PWR-C1-715WAC-P, and
PWC-C1-350WAC-P Power Supplies
LengthCordset RatingPart NumberLocale
2.5 m250 VAC, 10 ACAB-TA-ARArgentina
2.5 m250 VAC, 10 ACAB-TA-APAustralia
2.5 m125 VAC, 12 ACAB-ACBZ-12ABrazil
2.5 m250 VAC, 10 ACAB-ACBZ-10ABrazil
2.5 m250 VAC, 10 ACAB-TA-CNChina
2.5 m250 VAC, 10 ACAB-TA-DNDenmark
2.5 m250 VAC, 10 ACAB-TA-EUEurope
2.5 m250 VAC, 10 ACAB-TA-INIndia
2.5 m250 VAC, 16 ACAB-TA-ISIsrael
2.5 m250 VAC, 10 ACAB-TA-ITItaly
2.5 m125 VAC, 12 ACAB-TA-JP
9
Japan
2.5 m250 VAC, 12 ACAB-TA-250VAC-JPJapan
2.5 m250 VAC, 10 ACAB-AC-C15-KORKorea
2.5 m125 VAC, 12 ACAB-TA-NANorth America
2.5 m250 VAC, 10 ACAB-TA-SWSwitzerland
2.5 m125 VAC, 15 ACAB-AC-C15-TWTaiwan
2.5 m250 VAC, 10 ACAB-TA-UKUnited Kingdom
1.22 m250 VAC, 13 ACAB-C15-CBNCabinet jumper power
cord, C14-C15 connectors
9
Note
This power cord is not rated for use with PWR-C1-1100WAC or PWR-C1-1100WAC-P
power supplies.
The following table lists the specifications for the AC power cords that are available for PWR-C1-1900WAC-P
power supplies.
Table 47: AC Power Cords for PWR-C1-1900WAC-P
LengthCordset RatingPart NumberLocale
4.25 meter (m)250 VAC, 20 AC9K-PWR-CAB-AC-USNorth America
Cisco Catalyst 9300 Series Switches Hardware Installation Guide
119
Technical Specifications
Technical Specifications

Cisco Catalyst 9300 Series Specifications

General

Operating System	Cisco IOS XE
Model	Cisco Catalyst 9300 Series
Uplink Interfaces	10G, 25G, 40G
Downlink Interfaces	1G
Stacking Bandwidth	480 Gbps
Power Supply	Redundant power supplies
PoE	UPOE
Port Density	Up to 48 ports
Power over Ethernet (PoE)	UPOE, UPOE+
Security Features	MACsec
Management	Cisco DNA Center, CLI, SNMP
Redundancy	Stacking, redundant power supplies, hot-swappable fans