CIR Acquire rate/limit: 100/100
CIR Acquire invocations: 0
CIR Acquire throttled: 0
CIR Oversubscriptions: 0
Maximal EIR ratio: 10
Constant EIR demand: 2
Verifying Per-Controller Fairness Across DOCSIS Interfaces Status and
Statistics
To display the status and statistics for each controller interface, use the show cable acfe controller command
as shown in the following example:
Router# show cable acfe controller integrated-Cable 1/0/0
EIR Rebalance invoked: 450963
Adaptive CIR granted: 20
Adaptive CIR rejected: 1
Total clusters: 9
RF FlexBW
8 36376
9 36376
10 32625
......
The BG clusters span across multiple channels and are used as a means to share the underlying RF channel
bandwidth dynamically.
Use the show controllers integrated-Cable acfe cluster command to show Per-controller statistics and
clusters and checking the bandwidth information as follows:
Router# show controllers integrated-Cable 1/0/0 acfe cluster 0
Integrated-Cable 1/0/0 status:
Topology changed: No
========Cluster 0========
Number of RF: 2
RF FlexBW WB ExcessBW Quanta
0 35625 - 35438 35438
0 187 187
1 35250 0 35250 35250
Number of BG: 2
Intf Demand CIR Max CstrMin Alloc NBonus Ratio
WB0 1000 0 70875 35250 35437 35438 14855190400
IC0 1000 0 35625 0 35438 187 14855609600
Verifying Per-Interface Fairness Across DOCSIS Interfaces Status and Statistics
To display the status and statistics for each interface, use the show cable acfe interface command as shown
in the following example:
Router# show cable acfe interface wideband-cable 1/0/0:1
EIR Demand (raw/scale): 0/1
Per-Flow EIR BW (kbps): 19125
Guar Bonus BW (kbps): 19125
Non-guar Bonus BW (kbps): 38250
Reserved Bonus BW (kbps): 0
!
Cisco cBR Series Converged Broadband Routers Quality of Services Configuration Guide for Cisco IOS XE
Fuji 16.7.x
98
Fairness Across DOCSIS Interfaces
Verifying Per-Controller Fairness Across DOCSIS Interfaces Status and Statistics
To Next Page
Loading...
Need help?
General
