Cisco cBR 8 Configuration Guide

PurposeCommand or Action
Exits enforce-rule configuration mode and
returns to privileged EXEC mode.
end
Example:
Router(enforce-rule)# end
Step 5
Configuring Different Peak-Offpeak Monitoring Conditions for Weekends
Use the following procedure if you want to establish different peak and offpeak monitoring conditions for
subscribers for either upstream or downstream traffic on weekend days.
Procedure
PurposeCommand or Action
Enables privileged EXEC mode. Enter
your password if prompted.
enable
Example:
Router> enable
Step 1
Enters global configuration mode.configure terminal
Example:
Router# configure terminal
Step 2
Accesses the enforce-rule with the
specified name and enters enforce-rule
configuration mode.
cable qos enforce-rule name
Example:
Router(config)# cable qos enforce-rule test
Step 3
Specifies peak and offpeak monitoring
times on weekends.
weekend peak-time1{hour | hour:minutes} duration
minutes avg-rate rate [peak-time2 hour duration
minutes avg-rate rate] [duration offpeak-minutes
Step 4
avg-rate offpeak-rate] sample-interval minutes[penalty
minutes] {downstream| upstream}[enforce]
Example:
Router(enforce-rule)# weekend peak-time1 9
duration 180 avg-rate 2 peak-time2 16 duration
180 avg-rate 2 duration 120 avg-rate 3
sample-interval 10 upstream enforce
Example:
Router(enforce-rule)# weekend peak-time1 9:30
duration 180 avg-rate 2 peak-time2 16:58 duration
Cisco cBR Series Converged Broadband Routers Quality of Services Configuration Guide for Cisco IOS XE Fuji
16.7.x
131
Subscriber Traffic Management
Configuring Weekend Monitoring

Cisco cBR 8 Specifications

General

Brand	Cisco
Model	cBR 8
Category	Network Router
Language	English