CHAPTER 6
Fairness Across DOCSIS Interfaces
The Fairness Across DOCSIS Interfaces feature introduces an adaptive mechanism to effectively distribute
reservable bandwidth for committed information rate (CIR) flows and fair bandwidth for best-effort (BE)
service flows across adjacent bonding groups (BGs).
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest feature
information and caveats, see the release notes for your platform and software release. To find information
about the features documented in this module, and to see a list of the releases in which each feature is
supported, see the Feature Information Table at the end of this document.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to http://tools.cisco.com/ITDIT/CFN/. An account on http://
www.cisco.com/ is not required.
Contents
•
Hardware Compatibility Matrix for Cisco cBR Series Routers, page 90
•
Prerequisites for Fairness Across DOCSIS Interfaces , page 90
•
Restrictions for Fairness Across DOCSIS Interfaces, page 91
•
Information About Fairness Across DOCSIS Interfaces, page 91
•
How to Configure Fairness Across DOCSIS Interfaces, page 92
•
Verifying the Fairness Across DOCSIS Interfaces, page 96
•
Configuration Examples for Fairness Across DOCSIS Interfaces, page 99
•
Additional References, page 101
•
Feature Information for Fairness Across DOCSIS Interfaces, page 101
Cisco cBR Series Converged Broadband Routers Quality of Services Configuration Guide for Cisco IOS XE Fuji
16.7.x
89
To Next Page
Loading...
