Cisco cBR 8 Configuration Guide

CONTENTS
CHAPTER 1 Dynamic Bandwidth Sharing 1
Hardware Compatibility Matrix for Cisco cBR Series Routers 1
Information About Dynamic Bandwidth Sharing 2
How to Configure Dynamic Bandwidth Sharing 2
Configuring DBS for a Wideband Cable Interface 3
Configuring DBS for an Integrated Cable Interface 3
Verifying the Dynamic Bandwidth Sharing Configuration 4
Additional References 7
Feature Information for Dynamic Bandwidth Sharing 7
CHAPTER 2 Modular Quality of Service Command-Line Interface QoS 9
Finding Feature Information 9
Hardware Compatibility Matrix for Cisco cBR Series Routers 10
Restrictions for Applying QoS Features Using the MQC 10
About 11
The MQC Structure 11
Elements of a Traffic Class 11
Elements of a Traffic Policy 13
Nested Traffic Classes 15
match-all and match-any Keywords of the class-map Command 16
input and output Keywords of the service-policy Command 16
Benefits of Applying QoS Features Using the MQC 17
How to Apply QoS Features Using the MQC 17
Creating a Traffic Class 17
Creating a Traffic Policy 18
Attaching a Traffic Policy to an Interface Using the MQC 19
Verifying the Traffic Class and Traffic Policy Information 20
Configuration Examples for Applying QoS Features Using the MQC 21
Cisco cBR Series Converged Broadband Routers Quality of Services Configuration Guide for Cisco IOS XE Fuji
16.7.x
iii

Cisco cBR 8 Specifications

General

Brand	Cisco
Model	cBR 8
Category	Network Router
Language	English