Cisco cBR 8 - Disabling Weekend Monitoring

PurposeCommand or Action
180 avg-rate 2 duration 120 avg-rate 3
sample-interval 10 penalty 120 upstream enforce
Exits enforce-rule configuration mode
and returns to privileged EXEC mode.
end
Example:
Router(enforce-rule)# end
Step 5
Disabling Weekend Monitoring
Use the following procedure to turn off the weekend monitoring configuration and monitor on weekdays only.
Procedure
PurposeCommand or Action
Enables privileged EXEC mode. Enter your
password if prompted.
enable
Example:
Router> enable
Step 1
Enters global configuration mode.configure terminal
Example:
Router# configure terminal
Step 2
Accesses the enforce-rule with the specified
name and enters enforce-rule configuration
mode.
cable qos enforce-rule name
Example:
Router(config)# cable qos
enforce-rule test
Step 3
Disables monitoring on weekends.weekend off
Example:
Router(enforce-rule)# weekend off
Step 4
Exits enforce-rule configuration mode and returns
to privileged EXEC mode.
end
Example:
Router(enforce-rule)# end
Step 5
Cisco cBR Series Converged Broadband Routers Quality of Services Configuration Guide for Cisco IOS XE
Fuji 16.7.x
132
Subscriber Traffic Management
Configuring Weekend Monitoring