Cisco cBR 8 Configuration Guide

Status: Available
Certificate Serial Number: D54BB68FE934324F6B8FD0E41A65D867
Key Usage: General Purpose
Issuer:
CN = DOCSIS Cable Modem Root Certificate Authority
OU = Cable Modems
O = Data Over Cable Service Interface Specifications
C = US
Subject Name:
CN = "BPI Cable Modem Root Certificate Authority "
OU = DOCSIS
O = BPI
C = US
Validity Date:
start date: 07:00:00 UTC Mar 27 2001
end date: 06:59:59 UTC Jan 1 2007
What to Do Next
To display all certificates (Root, Manufacturers, CM) that the CMTS has learned, use the show crypto
ca certificates command.
Tip
Adding a Manufacturer’s Certificate as a Trusted Certificate
To DOCSIS specifications allow operators to control which manufacturer’s and CM certificates are allowed
on each CMTS by marking them as either trusted or untrusted. You can add a certificate to the list of trusted
certificates on the Cisco CMTS using either CLI commands or SNMP commands, as described in the following
sections:
Unless you cannot use SNMP to configure the cable modem, or have a particular application that requires
the use of CLI commands to add certificates, you should also use the SNMP method to add certificates
to a cable modem.
Note
Adding a Certificate as a Trusted Certificate Using the Command Line Interface
To add a manufacturer’s certificate to the list of trusted certificates on the CMTS, use the following procedure:
Procedure
PurposeCommand or Action
Enables privileged EXEC mode. Enter your
password if prompted.
enable
Example:
Router> enable
Router#
Step 1
Cisco cBR Series Converged Broadband Routers Quality of Services Configuration Guide for Cisco IOS XE Fuji
16.7.x
53
DOCSIS 1.1 for the Cisco CMTS Routers
Adding a Manufacturer’s Certificate as a Trusted Certificate

Cisco cBR 8 Specifications

General

Brand	Cisco
Model	cBR 8
Category	Network Router
Language	English