EasyManua.ls Logo

Cisco cBR 8 - Page 137

Cisco cBR 8
156 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PurposeCommand or Action
1
Specifies the registered quality of service
(QoS) profile that should be used for this
enforce-rule.
If you specified DOCSIS 1.0 cable modems
in Step 4, on page 126, use the following
commands:
If you want to manage a cable
modem that currently uses a
modem-created QoS profile,
you must first manually create
a new QoS profile on the CMTS
with the same QoS parameters
as the modem-created profile.
Then allow the modem to come
online using the manually
created profile before using this
command.
Note
1
qos-profile registered profile-id
2
qos-profile enforced profile-id
[no-persistence]
If you specified DOCSIS 1.1 cable modems
in Step 4, on page 126, use the service-class
{enforced | registered} name command.
Example:
Router(enforce-rule)# service-class
enforced test
2
Specifies the quality of service (QoS)
profile that should be enforced when
users violate their registered QoS
profiles for DOCSIS 1.0 cable modems.
For DOCSIS 1.1 (and later) cable modems,
identifies a particular service class with the
specified name for cable modem monitoring
in an enforce-rule.
Specifies the time period and sample rate used
for monitoring subscribers when legacy
monitoring is configured (Step 4, on page 126).
duration minutes avg-rate rate sample-interval
minutes[penalty minutes] {downstream |
upstream} [enforce]
Example:
Router(enforce-rule)# duration 10
Step 6
avg-rate 500 sample-interval 10 penalty
120 downstream enforce
Specifies peak monitoring periods when
peak-offpeak monitoring is configured (Step 4,
on page 126).
peak-time1 {hour | hour:minutes} duration
minutes avg-rate rate [peak-time2 {hour |
hour:minutes} duration minutes avg-rate
rate][duration offpeak-minutes avg-rate
Step 7
offpeak-rate ] sample-interval minutes[penalty
minutes] {downstream | upstream}[enforce]
Example:
Router(enforce-rule)# peak-time1 6
duration 180 avg-rate 2 peak-time2 18
duration 180 avg-rate 2 duration 120
avg-rate 3 sample-interval 10 upstream
enforce
Router(enforce-rule)# peak-time1 6:30
duration 180 avg-rate 2 peak-time2 18:40
duration 180 avg-rate 2 duration 120
Cisco cBR Series Converged Broadband Routers Quality of Services Configuration Guide for Cisco IOS XE Fuji
16.7.x
127
Subscriber Traffic Management
Creating and Configuring an Enforce-Rule

Table of Contents

Other manuals for Cisco cBR 8

Related product manuals