Cisco cBR 8 Configuration Guide

DescriptionMAC State Value
The DHCP reply was received and the IP address has
been assigned, but the CM has not yet replied with
an IP packet.
init(i)
The CM has begun to download the option file
(DOCSIS configuration file) using the Trivial File
Transfer Protocol (TFTP), as specified in the DHCP
response. If the CM remains in this state, it indicates
that the download has failed.
init(o)
Time-of-day (TOD) exchange has started.init(t)
The CM is being reset and will shortly restart the
registration process.
resetting
Non-error Status Conditions
The CM is considered offline (disconnected or
powered down).
offline
The CM has registered and is enabled to pass data on
the network.
online
The CM registered, but network access for the CM
has been disabled through the DOCSIS configuration
file.
online(d)
The CM registered, BPI is enabled and KEK is
assigned.
online(pk)
The CM registered, BPI is enabled and TEK is
assigned. BPI encryption is now being performed.
online(pt)
The Cm registered, BPI is enabled, KEK was assigned
but has since expired.
expire(pk)
The Cm registered, BPI is enabled, TEK was assigned
but has since expired.
expire(pt)
Error Status Conditions
Cisco cBR Series Converged Broadband Routers Quality of Services Configuration Guide for Cisco IOS XE
Fuji 16.7.x
62
DOCSIS 1.1 for the Cisco CMTS Routers
Monitoring the DOCSIS Network

Cisco cBR 8 Specifications

General

Brand	Cisco
Model	cBR 8
Category	Network Router
Language	English