Need help?Do you have a question about the Cisco Firepower 2100 and is the answer not in the manual?
Overview of the two available applications: Secure Firewall Threat Defense and ASA.
Discussion of the different manager choices available for the applications.
Preparation steps before deploying the threat defense.
Details on how to review the network setup for deployment.
Instructions on how to physically connect the device.
Steps to power on the threat defense device.
Steps to perform the initial setup of the threat defense.
Instructions for accessing the management center interface.
Steps to register the threat defense device with the management center.
Guidance on setting up fundamental security policies.
Explains the mechanisms behind remote threat defense management.
Steps for deploying threat defense using low-touch provisioning.
Steps for pre-configuring the device by a central administrator.
Procedures for deploying the firewall using low-touch provisioning.
Details the default network setup for device manager deployment.
Instructions on how to physically connect the device.
Instructions for accessing the device manager interface.
Steps to complete the initial device setup.
Process for acquiring and applying necessary licenses for the device manager.
Steps for configuring firewall settings within the device manager.
Explains how to manage threat defense using CDO.
Steps for deploying threat defense using CDO low-touch provisioning.
Steps for pre-configuring the device by a central administrator.
Steps to deploy the firewall using the CDO onboarding wizard.
Guidance on setting up fundamental security policies.
Provides information about the ASA functionality.
Steps for migrating ASA 5500-X configurations.
Instructions on how to physically connect the device.
Instructions for accessing the ASDM interface.
Process for acquiring and applying necessary licenses for the ASA.
Steps for configuring the ASA using ASDM.
Provides information about the ASA functionality.
Lists ASA and FXOS features not supported on Firepower 2100.
Outlines the tasks required for ASA platform mode deployment.
Procedure to switch the device to Platform mode.
Instructions for accessing the chassis manager interface.
How to access the command-line interfaces for ASA and FXOS.
To Next Page
General