Cisco IE-3000-8TC - Page 848

Index
IN-16
Cisco IE 3000 Switch Software Configuration Guide
OL-13018-03
IP addresses (continued)
See also IP information
ip igmp profile command 25-24
IP information
assigned
manually 4-14
through DHCP-based autoconfiguration 4-3
default configuration 4-3
IP phones
and QoS 17-1
automatic classification and queueing 36-19
configuring 17-4
ensuring port security with QoS 36-35
trusted boundary for QoS 36-35
IP precedence 36-2
IP-precedence-to-DSCP map for QoS 36-52
IP protocols in ACLs 34-9
IP Service Level Agreements
See IP SLAs
IP service levels, analyzing 35-1
IP SLAs
benefits 35-2
configuration guidelines 35-5
Control Protocol 35-3
default configuration 35-5
definition 35-1
measuring network performance 35-2
monitoring 35-6
operation 35-3
responder
described 35-3
enabling 35-6
response time 35-4
SNMP support 35-2
supported metrics 35-2
IP source guard
and 802.1x 23-14
and DHCP snooping 23-12
and EtherChannels 23-14
IP source guard (continued)
and port security 23-14
and private VLANs 23-14
and routed ports 23-13
and TCAM entries 23-14
and trunk interfaces 23-14
and VRF 23-14
binding configuration
automatic 23-12
manual 23-12
binding table 23-12
configuration guidelines 23-13
default configuration 23-13
described 23-12
disabling 23-15
displaying
bindings 23-15
configuration 23-15
enabling 23-14
filtering
source IP address 23-13
source IP and MAC address 23-13
source IP address filtering 23-13
source IP and MAC address filtering 23-13
static bindings
adding 23-14
deleting 23-15
IP traceroute
executing 39-12
overview 39-11
IPv4 ACLs
applying to interfaces 34-16
extended, creating 34-8
named 34-12
standard, creating 34-7
IPv4 and IPv6
dual protocol stacks 37-4