2-15
Cisco IP Communicator Administration Guide for Cisco CallManager
OL-4698-01
Chapter 2 Preparing to Deploy Cisco IP Communicator
Running the Cisco IP Communicator Administration Tool
You can get the Administration Tool from the same Cisco IP Communicator
software download web site:
http://www.cisco.com/cgi-bin/tablebuild.pl/ip-comm
Table 2-4 summarizes the benefits of running the Administration Tool.
Tip • Typically, the Cisco CallManager publisher is the TFTP server where phone
loads will be installed. Running the Administration Tool on the publisher
allows the Directory Wizard to auto-detect configuration values. (See the
“How to Configure Quick Search Using the Directory Wizard” section on
page 5-8 for details.)
• If you have already run the Cisco IP Communicator Administration Tool but
have not enabled the HTTP option, you can run the tool again and select the
option in order to enable this feature. (However, in order to disable HTTP
access once selected, you must uninstall and re-install the tool.)
To Next Page
Loading...
