SA-ANSI
OC192 LR/STM64
LH ITU 15xx.xx
SA-HD
and
SA-ANSI
Fully
compatible
Fully
compatible
Fully
compatible
Fully
compatible
Fully
compatible
Fully
compatible
Fully
compatible
FC_MR-4
SA-HD
and
SA-ANSI
Fully
compatible
Fully
compatible
Fully
compatible
Fully
compatible
Fully
compatible
Fully
compatible
Fully
compatible
MRC-12
3
All
Not
supported
Not
supported
Fully
compatible
Fully
compatible
Fully
compatible
Fully
compatible
Fully
compatible
MRC-2.5G-4 All
Not
supported
Not
supported
Not
supported
Not
supported
Not
supported
Fully
compatible
Fully
compatible
OC192SR1/STM64IO
Short Reach/
OC192/STM64 Any
Reach
4
SA-HD
and
SA-ANSI
Not
supported
Not
supported
Fully
compatible
Fully
compatible
Fully
compatible
Fully
compatible
Fully
compatible
1. The shelf assemblies supported are 15454-SA-HD, 15454-SA-ANSI, and 15454-NEBS3E.
2. DS3 card having the part number 87-31-0001 does not work in Cisco ONS 15454 R8.0 and later.
3. Slots 1 to 4 and 14 to 17 give a total bandwidth of up to 2.5 Gb/s. Slots 5, 6, 12 , and 13 give a total
bandwidth of up to 10 Gb/s
4. These cards are designated as OC192-XFP in CTC.
If an upgrade is required for compatibility, contact the Cisco Technical Assistance Center (TAC). For contact
information, go to http://www.cisco.com/tac
ONS_15454_Reference_Manual_R8.5.x_--_Shelf_and_Backplane_Hardware
Table 1-32: ONS 15454 Software and Hardware Compatibility-XC10G and XC-VXC-10G Configurations64
To Previous Page
Loading...
