A-13
Cisco ONS 15454 SONET/SDH ML-Series Multilayer Ethernet Card Software Feature and Configuration Guide, R4.0
78-15224-02
Appendix A Command Reference
show ons alarm defect eqpt
show ons alarm defect eqpt
This commands displays the equipment layer defects.
Syntax Description This command has no arguments or keywords.
Defaults N/A
Command Modes Privileged EXEC
Usage Guidelines This commands displays set of active defects for the equipment layer and the possible set of defects that
can be set.
Examples
router#show ons alarm defect eqpt
Equipment Defects
Active: CONTBUS-IO-B
Reportable to TCC/CLI: CONTBUS-IO-A CONTBUS-IO-B CTNEQPT-PBWORK CTNEQPT-PBPROT EQPT
RUNCFG-SAVENEED ERROR-CONFIG
Related Commands show ons alarm failures
To Next Page
Loading...
