Wireless Networks
Basic Wireless Settings
Cisco RV132W ADSL2+ Wireless-N and RV134W VDSL2 Wireless-AC VPN Router Administration Guide 78
4
STEP 7 In the Key Renewal field, enter the duration of time (600–7200 seconds) between
key renewals. The default value is 3600.
STEP 8 Click Save to save your settings. Click Back to go back to the Basic Settings
page.
Configuring WPA2-Enterprise and WPA2-Enterprise Mixed
The WPA2 Enterprise and WPA2 Enterprise Mixed security modes allow you to
use the RADIUS server authentication.
• WPA2-Enterprise—Allows you to use WPA2 to connect using the RADIUS
server authentication.
• WPA2-Enterprise Mixed—Allows WPA2 client to connect using the
RADIUS server authentication.
To configure the WPA2 Enterprise security mode:
STEP 1 In the Wireless Table (Wireless > Basic Settings), check the box for the network
you want to configure.
STEP 2 Click Edit Security Mode.
STEP 3 In the Select SSID field, select the SSID for which to configure the security
settings.
STEP 4 From the Security Mode menu, select one of the two WPA2 Enterprise options.
STEP 5 In the RADIUS Server field, enter the IP address of the RADIUS server.
STEP 6 In the RADIUS Port field, enter the port used to access the RADIUS server.
STEP 7 In the Shared Key field, enter an alphanumeric phrase.
STEP 8 In the Key Renewal field, enter the duration of time (600–7200 seconds) between
key renewals. The default value is 3600.
STEP 9 Click Save to save your settings.
STEP 10 Click Back to go back to the Basic Settings page.
To Next Page
Loading...
