Cisco SCE 8000 User Manual

C-9
Cisco SCE8000 GBE Installation and Configuration Guide
Appendix C Cisco Service Control Engine System Log Messages
Informational Messages, Severity Level 6
Error Message %LOCAL7-6-SHUTDOWNCC_CALLED:"Shutting down the box per user request."
Explanation This message is displayed when the Cisco SCE 8000 platform is shut down on a user’s
request.
Recommended Action None.
Error Message %LOCAL7-6-START_SHUT_NO_SHUT:"Starting Line Card on slot slot-number state
change to <%s>"
Explanation This message is displayed when the user information for a linecard slot state is changed
to shutdown or no-shutdown.
In this message, number indicates the slot number, and state indicates shutdown or no-shutdown.
Recommended Action None.
Error Message %LOCAL7-6-LINECARD_SHUTDOWN_STATE: "Linecard on slot slot-number is state."
Explanation This message is displayed to indicate the state of a linecard: enabled or disabled.
In this message, slot-number indicates the slot number, and state indicates the linecard state: enabled
or disabled.
Recommended Action None.
Error Message %LOCAL7-6-SET_TIME_ZONE:"Time zone set to zone num minutes."
Explanation This message is displayed to indicate the time zone set in the system.
In this message, zone indicates the time zone, and num indicates the minutes.
Recommended Action None.
Error Message %LOCAL7-6-SET_CLOCK:"System clock set to GMT-time."
Explanation
This message is displayed to indicate that the system clock is updating the GMT time
and the Traffic Processor.
In this message, GMT-time indicates the time in GMT format.
Recommended Action None.

Cisco SCE 8000 Specifications

General

Brand	Cisco
Model	SCE 8000
Category	Switch
Language	English