Cisco SCE 8000 User Manual

C-12
Cisco SCE8000 GBE Installation and Configuration Guide
Appendix C Cisco Service Control Engine System Log Messages
Informational Messages, Severity Level 6
Error Message %LOCAL7-6-SET_ENABLED_CFG_USER:"Management agent was <state> by user
configuration."
Explanation
This message is displayed to indicate that the user information management agent in
Cisco SCE is enabled or disabled by user configuration.
In this message, state indicates whether the management agent is enabled or disabled.
Recommended Action None.
Error Message %LOCAL7-6-SET_ENABLED_TO_DEFAULT:"Management agent status was set to
its default configuration.
Explanation
This message is displayed to indicate that the user information management agent status
was set to its default configuration.
Recommended Action None.
Error Message %LOCAL7-6-RESTART_CALLED :"Management agent restart procedure called."
Explanation
This message is displayed when the management agent restart procedure is called by
Cisco SCE.
Recommended Action None.
Error Message %LOCAL7-6-RESTART_FINISHED:"Management agent restart procedure
finished successfully."
Explanation
This message is displayed when the management agent JVM restart procedure is
successful.
Recommended Action None.
Error Message %LOCAL7-6-RESTART_FROM_JAVA_CALLED :"Management agent self restart
procedure called."
Explanation
This message is displayed when the management agent is restarted from JVM.
Recommended Action None.
Error Message %LOCAL7-6-UM_AGENT_IS_UP:"Management agent is up."
Explanation
This message is displayed when the user management agent is up and running.
Recommended Action None.

Cisco SCE 8000 Specifications

General

Brand	Cisco
Model	SCE 8000
Category	Switch
Language	English