C-13
Cisco SCE8000 GBE Installation and Configuration Guide
Appendix C Cisco Service Control Engine System Log Messages
Informational Messages, Severity Level 6
Error Message %LOCAL7-6-UM_AGENT_IS_DOWN:"Management agent is down."
Explanation
This message is displayed when the user management agent is down.
Recommended Action None.
Error Message %LOCAL7-6-EXTERNAL_BYPASS_ACTIVATED:"Activating external bypass
device due to user request"
Explanation
This message is displayed when a user manually activates the external optical bypass
device.
Recommended Action None.
Error Message %LOCAL7-6-EXTERNAL_BYPASS_DEACTIVATED:"Deactivating external bypass
device due to user request"
Explanation
This message is displayed when a user manually deactivates the external optical bypass
device.
Recommended Action None.
Error Message %LOCAL7-6-EXTERNAL_BYPASS_ACTIVATED_LINK_CUTOFF:"External bypass
device activated and detected on link num, taking the link down for num-sec
milliseconds."
Explanation
This message is displayed when preparing a link for external bypass. The link is
restarted before external bypass is activated. Restarting the link involves deactivating the link for a
few milliseconds and then reactivating it.
In this message, num indicates the link, and num-sec indicates the number of milliseconds.
Recommended Action None.
Error Message %LOCAL7-6-EXTERNAL_BYPASS_ACTIVATED_TEST_PACKETS_ON_HOLD:"During
external bypass device activation procedure, test packets are disabled for num-sec
milliseconds."
Explanation
This message is displayed when the test packet mechanism is put on hold during the
external bypass device activation period. This is done to prevent packets from being dropped.
In this message, num indicates the link.
Recommended Action None.
To Next Page
Loading...
Need help?
General
