Cisco SCE 8000 User Manual

C-17
Cisco SCE8000 GBE Installation and Configuration Guide
Appendix C Cisco Service Control Engine System Log Messages
Informational Messages, Severity Level 6
Error Message %LOCAL7-6-NOTIFY_ALL_ANONYMOUS: "Sending notifications for all
anonymous subscribers."
Explanation
This debug informational message is displayed while sending notifications to all the
anonymous subscribers. This message is displayed when the notification function for all the
anonymous parties is invoked.
Recommended Action None.
Error Message %LOCAL7-6-PASSWORD_CHANGED: "A new password was set for level level."
Explanation
This message is displayed when a new password is set for a given privilege level.
In this message, level indicates the privilege level.
Recommended Action None.
Error Message %LOCAL7-6-ASSIGNCFG_START: "Starting application load of application
file
Explanation
This message is displayed when an application is assigned to a line card. This message
displays the loaded application name and the line card slot number.
Recommended Action None.
Error Message %LOCAL7-6-ASSIGNCFG_OK: "Application assigned to slot
slot-num.\nApplication file
Explanation
This message is displayed after an application is assigned to a line card slot. The Cisco
SCE 8000 platform displays the application assigned to a particular line card slot number, and the
application file name.
In this message, slot-num indicates the slot number.
Recommended Action None.
Error Message %LOCAL7-6-UNASSIGNCFG_START: "Starting application unload to slot
slot-num."
Explanation
This message is displayed when Cisco SCE begins unloading an application from a line
card slot.
In this message, slot-num indicates the slot number.
Recommended Action None.

Cisco SCE 8000 Specifications

General

Brand	Cisco
Model	SCE 8000
Category	Switch
Language	English