Cisco SCE 8000 User Manual

C-20
Cisco SCE8000 GBE Installation and Configuration Guide
Appendix C Cisco Service Control Engine System Log Messages
Informational Messages, Severity Level 6
Error Message %LOCAL7-6-LINKMODE_SNIFFING_TRAP: "<%s>"
Explanation
This trap is generated when the Cisco SCE link mode is set to sniffing state.
Recommended Action None.
Error Message %LOCAL7-6-REMOVE_ALL_INTRODUCED_MAPPINGS: "Removing all introduced
subscribers' mappings."
Explanation
This message is displayed before all the external subscriber mappings are removed from
the database.
Recommended Action None.
Error Message %LOCAL7-6-SYNC_START: "Subscribers' database: starting
synchronization process."
Explanation
This message is displayed when synchronization of the party database using external
management is started.
Recommended Action None.
Error Message %LOCAL7-6-SYNC_END: "Subscribers' database: synchronization process
done."
Explanation
This message is displayed when synchronization of the party database using external
management is stopped.
Recommended Action None.
Error Message %LOCAL7-6-REMOVE_ALL_ANONYMOUS_GROUPS: "Removing all
anonymous-subscribers groups."
Explanation
This message is displayed in response to a command that is issued to remove all the
anonymous subscriber groups.
Recommended Action None.
Error Message %LOCAL7-6-SET_ALL_TEMPLATES_TO_DEFAULT: "Setting all subscriber
templates to default values."
Explanation
This message is displayed in response to a command that is issued to set all the
subscriber templates to their default values.
Recommended Action None.

Cisco SCE 8000 Specifications

General

Brand	Cisco
Model	SCE 8000
Category	Switch
Language	English