Cisco SCE 8000 User Manual

C-19
Cisco SCE8000 GBE Installation and Configuration Guide
Appendix C Cisco Service Control Engine System Log Messages
Informational Messages, Severity Level 6
Error Message %LOCAL7-6-SWITCH_CONNECTION_OPEN: "Formatter switched active
connection to: address %s, port %d, category %d."
Explanation
This message is displayed to provide the details of the RDR formatter IP address, port
number, and the category of the switched connection that is in active state.
Recommended Action None.
Error Message %LOCAL7-6-CONNECTION_CLOSED: "Formatter connection closed
Explanation
This message is displayed to provide the details of the RDR formatter IP address along
with the port number of the connection that is closed.
Recommended Action None.
Error Message %LOCAL7-6-CONNECTION_OPENED: "Formatter connection opened
Explanation
This message is displayed to provide details of the RDR formatter IP address along with
the port number for which the connection is opened.
Recommended Action None.
Error Message %LOCAL7-6-LOGGERLINEATTACKLOGFULLTRAP: "<%s>"
Explanation
This trap is generated when the logger file, LineAttackLog, is full.
Recommended Action None.
Error Message %LOCAL7-6-LINKMODE_BYPASS_TRAP: "<%s>"
Explanation
This trap is generated when the Cisco SCE link mode is set to bypass state.
Recommended Action None.
Error Message %LOCAL7-6-LINKMODE_FORWARDING_TRAP: "<%s>"
Explanation
This trap is generated when the Cisco SCE link mode is set to forwarding state.
Recommended Action None.
Error Message %LOCAL7-6-LINKMODE_CUTOFF_TRAP: "<%s>"
Explanation
This trap is generated when the Cisco SCE link mode is set to cutoff state.
Recommended Action None.

Cisco SCE 8000 Specifications

General

Brand	Cisco
Model	SCE 8000
Category	Switch
Language	English