Cisco SCE 8000

C-27
Cisco SCE8000 GBE Installation and Configuration Guide
Appendix C Cisco Service Control Engine System Log Messages
Informational Messages, Severity Level 6
Error Message %LOCAL7-6-CHASSIS_TEMP_ALARMON_TRAP : "<%s>"
Explanation
This SNMP trap is generated when the chassis temperature alarm is in the On state.
Recommended Action None.
Error Message %LOCAL7-6-CHASSIS_TEMP_ALARMOFF_TRAP: "<%s>"
Explanation
This SNMP trap is generated when the chassis temperature alarm is in the OFF state.
Recommended Action None.
Error Message %LOCAL7-6-CHASSIS_VOLTAGE_ALARMON_TRAP: "<%s>"
Explanation
This SNMP trap is generated when the chassis voltage alarm is in the ON state.
Recommended Action None.
Error Message %LOCAL7-6-CHASSIS_FANS_ALARMON_TRAP: "<%s>"
Explanation
This SNMP trap is generated when the chassis fans alarm is in the ON state.
Recommended Action None.
Error Message %LOCAL7-6-CHASSIS_POWERSUPPLY_ALARMON_TRAP: "<%s>"
Explanation
This SNMP trap is generated when the chassis power supply alarm that is in the ON
state is detected.
Recommended Action None.
Error Message %LOCAL7-6-CHASSIS_LINEFEED_ALARMON_TRAP: "<%s>"
Explanation
This SNMP trap is generated when the chassis line feed alarm that is in the ON state is
detected.
Recommended Action None.
Error Message %LOCAL7-6-RDR_ACTIVECONNECTION_TRAP: "<%s>"
Explanation
This SNMP trap is generated when one of the RDR formatter connections becomes the
active connection.
Recommended Action None.