Cisco SCE 8000

C-33
Cisco SCE8000 GBE Installation and Configuration Guide
Appendix C Cisco Service Control Engine System Log Messages
Informational Messages, Severity Level 6
Error Message %LOCAL7-6-CLOSED: "Party data base was closed."
Explanation
This message is generated when all the party-related record files are closed as part of a
system reboot or because of a watchdog failure.
Recommended Action None.
Error Message %LOCAL7-6-EXECUTE_PARTY_FILE_INFO1: "executePartyFile() <%s>."
Explanation
This message is generated when timeout occurs while waiting for another task to
complete the related operation. This informational message is displayed when Cisco SCOS tries to
execute the party and mapping files.
Recommended Action None.
Error Message %LOCAL7-6-REMOVING_ALL_INTRODUCED_MAPPING: "Removing all introduced
subscriber’ mappings."
Explanation
This message is displayed to indicate that all the externally introduced subscriber
mappings have been removed from the database.
Recommended Action None.
Error Message %LOCAL7-6-SET_SM_CON_STATE_UP: "Subscriber Manager connection is
up<%s>"
Explanation
This message is generated when the Subscriber Manager connection is up. However, the
status depends on the Subscriber Manager connection failure action.
Recommended Action None.
Error Message %LOCAL7-6-SET_SM_CON_STATE_DOWN: "Subscriber Manager connection is
down, configured action is '<%s>'."
Explanation
This message is generated when the Subscriber Manager connection is down.
Configured action may be one of the following states: remove-mappings, Shut (and
Remove-Mappings), force-failure, or none.
Recommended Action None.
Error Message %LOCAL7-6-SET_SM_ACTION_CHANGED: "Subscriber Manager
connection-failure action set to '<%s>'."
Explanation
This message is generated when the Subscriber Manager connection failure action is
changed to remove-mappings, force-failure, or none.
Recommended Action None.