Cisco SCE 8000 User Manual

C-46
Cisco SCE8000 GBE Installation and Configuration Guide
Appendix C Cisco Service Control Engine System Log Messages
Warning Messages, Severity Level 4
Warning Message %LOCAL7-4-USER_SCROLL_TO_NEXT_FAILED1: "User log
Explanation
This message is generated when a file is inactive or an error occurs on opening the
corresponding user log file.
Recommended Action None.
Warning Message %LOCAL7-4-USER_SCROLL_TO_NEXT_FAILED2: "User log: Failed to scroll
- closed a full file and couldn't reopen."
Explanation
This warning message is generated when the existing user log file failes to reopen.
Recommended Action None.
Warning Message %LOCAL7-4-USER_INIT_SCROLL_TO_END_FAILED: "User log init failure
Explanation
This message is generated when failure occurs while opening a user log file or when a
user scrolls the file.
Recommended Action None.
Warning Message %LOCAL7-4-USER_INIT_SCROLL_TO_NEXT_FAILED: "User log init failure
Explanation
This message is generated when a user log file is in the inactive state and an error occurs
while opening this log file or when the user log file is active and a blank space is available, but fails
to open the file for writing.
Recommended Action None.
Warning Message %LOCAL7-4-FOUND_IMPROPER_CONNECTIONS "RedundancyManager
Explanation
This message is generated when the redundancy manager finds an improper cascade
connection, with the ports being connected to the wrong ports on the peer box.
Recommended Action None.
Warning Message %LOCAL7-4-LINK_DOWN_DETECTED "Link failure reflection
Explanation
This message is generated when the link on a port is down and reflection gets activated.
Recommended Action None.
Warning Message %LOCAL7-4-LINK_DOWN_DETECTED_ON_ALL_PORTS "Link failure reflection
on all ports
Explanation
This message is generated when the link on a port is down and reflection gets activated
on all the ports.
Recommended Action None.

Cisco SCE 8000 Specifications

General

Brand	Cisco
Model	SCE 8000
Category	Switch
Language	English