EasyManuals Logo

Cisco SCE 8000 User Manual

Cisco SCE 8000
248 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #243 background imageLoading...
Page #243 background image
C-47
Cisco SCE8000 GBE Installation and Configuration Guide
Appendix C Cisco Service Control Engine System Log Messages
Warning Messages, Severity Level 4
Warning Message %LOCAL7-4-FORCE_LINK_DOWN "Link failure reflection
Explanation
This message is generated when link-failure reflection occurs when the link on a port is
forced down by another port.
Recommended Action None.
Warning Message %LOCAL7-4-FORCE_LINK_DOWN_ON_ALL_PORTS "Link failure reflection on
all ports
Explanation
This message is displayed when link-failure reflection occurs on all the ports. The link
on one port is forced down by another port.
Recommended Action None.
Warning Message %LOCAL7-4-LIC_AWARE_ACTIVE "No Link reflection is done due two ports
%d and %d on the same link are down and linecard aware mode is active"
Explanation
This message is displayed because no link reflection occurs because two ports on the
same link are down and the linecard-aware mode is active.
Recommended Action None.
Warning Message %LOCAL7-4-ILLEGAL_PACKET_IN_VAS_HC_RANGE "Got a packet on VAS
Health Check IP range which does not match health check packet format. This may
indicate a WRONG configuration"
Explanation
This message is displayed because the packet that is obtained is not in the VAS health
check IP range and does not match the health check packet format.
Recommended Action None.
Warning Message %LOCAL7-4-VAS_MIRROR_PACKET_BACK "Got a packet from a VAS server
with VLAN tag %u, this packet was originally mirrored by the SCE. This may indicate
a WRONG configuration"
Explanation
This message is displayed because the packet obtained from the VAS server is a packet
mirrored by Cisco SCE.
Recommended Action None.
Warning Message %LOCAL7-4-VAS_LC_GROUP_IS_IN_FAILURE "VAS Server Group %lu is in
Failure state"
Explanation
This message is displayed when the VAS server group is in the failure state.
Recommended Action None.

Table of Contents

Other manuals for Cisco SCE 8000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco SCE 8000 and is the answer not in the manual?

Cisco SCE 8000 Specifications

General IconGeneral
BrandCisco
ModelSCE 8000
CategorySwitch
LanguageEnglish

Related product manuals