Cisco SCE 8000 User Manual

C-48
Cisco SCE8000 GBE Installation and Configuration Guide
Appendix C Cisco Service Control Engine System Log Messages
Warning Messages, Severity Level 4
Warning Message %LOCAL7-4-VAS_LC_SERVER_IS_DOWN "VAS server %lu is DOWN"
Explanation
This message is displayed when the VAS server is down.
Recommended Action None.
Warning Message %LOCAL7-4-VAS_HC_SERVER_LOG_EVENT_STATE_DOWN "Vas Health Check
Monitor: NO vital signs from VAS server %lu."
Explanation
This message is displayed when the VAS Helath Check Server state is DOWN.
Recommended Action None.
Warning Message %LOCAL7-4-VAS_HC_SERVER_LOG_EVENT_NO_IPS "Vas Health Check Monitor
Explanation
This message is displayed when the VAS Health Check Monitor does not run the check
for the VAS server.
Recommended Action None.
Warning Message %LOCAL7-4-STANDBY_VIOLATION: "Subscriber operations are not
permitted on standby box - discarding operation"
Explanation
This message is displayed when the subscriber-related commands are executed when
the Cisco SCE is on the standby mode.
Recommended Action None.
Warning Message %LOCAL7-4-DEBUG_TELNET_ACCESS_FAILED: "Fail to <%s> debug-telnet
(port 2300)"
Explanation
This message is displayed when Cisco SCE fails to enable debug telnet access from the
remote machines.
Recommended Action None.
Warning Message %LOCAL7-4-DEBUG_SHELL_ACCESS_FAILED: "Fail to <%s> debug-shell
(port 2301)"
Explanation
This message is displayed when Cisco SCE fails to enable Cisco SCOS shell access
from the remote machines.
Recommended Action None.

Cisco SCE 8000 Specifications

General

Brand	Cisco
Model	SCE 8000
Category	Switch
Language	English