C-49
Cisco SCE8000 GBE Installation and Configuration Guide
Appendix C Cisco Service Control Engine System Log Messages
Warning Messages, Severity Level 4
Warning Message %LOCAL7-4-DEBUG_SSH_ACCESS_FAILED: "Fail to %s debug-ssh (port
2200)"
Explanation
This message is displayed when Cisco SCE fails to enable Cisco SCOS SSH access
from the remote machines.
Recommended Action None.
Warning Message %LOCAL7-4-BIND_VTY_SERVICE_FAILED: "Fail to bind telnet service to
management vlan (%u) and address (<%s>)"
Explanation
This message is displayed when the Cisco SCE fails to bind the telnet service to a
corresponding management VLAN.
Recommended Action None.
Warning Message %LOCAL7-4-UNBIND_VTY_SERVICE_FAILED: "Fail to un-bind telnet
service from management vlan (%u)"
Explanation
This message is displayed when Cisco SCE fails to unbind the telnet service from the
corresponding management VLAN.
Recommended Action None.
Warning Message %LOCAL7-4-BIND_SSH_SERVICE_FAILED: "Fail to bind ssh service to
management vlan (%u) and address (<%s>)"
Explanation
This message is displayed when Cisco SCE fails to bind the SSH service to a given
management VLAN.
Recommended Action None.
Warning Message %LOCAL7-4-UNBIND_SSH_SERVICE_FAILED: "Fail to un-bind ssh service
from management vlan (%u)"
Explanation
This message is displayed when Cisco SCE fails to unbind the SSH service to a given
management VLAN.
Recommended Action None.
Warning Message %LOCAL7-4-BIND_SNMP_SERVICE_FAILED: "Fail to bind SNMP service to
management vlan (%u) and address (<%s>)"
Explanation
This message is displayed when Cisco SCE fails to bind the SNMP service to a given
management VLAN.
Recommended Action None.