C-50
Cisco SCE8000 GBE Installation and Configuration Guide
Appendix C Cisco Service Control Engine System Log Messages
Warning Messages, Severity Level 4
Warning Message %LOCAL7-4-UNBIND_SNMP_SERVICE_FAILED: "Fail to un-bind SNMP service
from management vlan (%u)"
Explanation
This message is displayed when Cisco SCE fails to unbind the SNMP service to a given
management VLAN.
Recommended Action None.
Warning Message %LOCAL7-4-HOSTNAME_NOT_FOUND: "Formatter connection host name was
not found
Explanation
This message is displayed when the formatter connection of the corresponding host
name is not found.
Recommended Action None.
Warning Message %LOCAL7-4-LOGGER_USER_WARN_MSG: "<%s>"
Explanation
This message is displayed when a warning message is added to a user log file.
Recommended Action None.
Warning Message %LOCAL7-4-DBG_SECURE_FILES_FAILED: "DBG failure: Failed to secure
DBG files."
Explanation
This message is generated when Cisco SCE fails to ensure that the dbg file exists and is
not corrupt.
Recommended Action None.
Warning Message %LOCAL7-4-DBG_MESSAGE_MASKED: "DBG masked message - severity = %d ,
module = %u"
Explanation
This message is generated when Cisco SCE tries to write a masked debug message with
a given severity, from the corresponding module to the debug log.
Recommended Action None.
Warning Message %LOCAL7-4-DBG_MESSAGE_FAILED_NO_FILE: "DBG message failed - no file
attached"
Explanation
This message is displayed when Cisco SCE tries to write a file that does not exist.
Recommended Action None.