Cisco SG220-26 Administration Guide

Cisco 220 Series Smart Switches Administration Guide Release 1.1.0.x 2
Contents
File Actions 44
Upgrade/Backup Firmware/Language 45
Active Image 48
Download/Backup Configuration or Logs 49
Configuration File Properties 51
Copy/Save Configuration Files 52
DHCP Auto Configuration 53
Chapter 5: Administration: General Information 58
Device Models 59
Viewing System Summary 61
Configuring System Settings 63
Configuring Console Settings 64
Rebooting the Switch 64
Defining Idle Session Timeout 65
Ping a Host 66
Using Traceroute 66
Chapter 6: Administration: Time Settings 68
System Time Options 69
Configuring System Time 69
Configuring SNTP Server 71
Time Range 72
Absolute Time Range 73
Periodic Time Range 73
Chapter 7: Administration: Diagnostics 75
Testing Copper Ports 75
Viewing Optical Module Status 76
Configuring Port and VLAN Mirroring 77

Cisco SG220-26 Specifications

General

Model	SG220-26
Category	Switch
Ports	24 x 10/100/1000 + 2 x Gigabit SFP
Switching Capacity	52 Gbps
Forwarding Rate	38.69 Mpps
Layer	Layer 2
PoE	No
Mounting	Rack-mountable
MAC Address Table Size	8K entries
Power Supply	Internal
Management	Web-based
Jumbo Frame Support	9216 bytes
Operating Temperature	0°C to 40°C (32° to 104°F)
Storage Temperature	-20°C to 70°C (-4° to 158°F)
Humidity	10% to 90%, non-condensing
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p