Cisco Telepresence MX800 Administrator's Guide

D15119.02 MX700 and MX800 Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.
136
Cisco TelePresence MX700 and MX800 Administrator Guide
Technical specification for MX700 and MX800
PRODUCT SPECIFICATION
Software compatibility
Cisco TelePresence Software Version TC7.1.2 or later
Components
Fully integrated unit including:
• Codec
• Display
• Camera (2 cameras as option)
• Loudspeakers
• Cisco TelePresence Table Microphone 60 (two
microphones are included in base package)
• Cables included: DVI-I-to-VGA cable with Euroblock
to 3.5-mm jack audio cable, HDMI to HDMI, LAN
cable, and power cable
Display
Cisco TelePresence MX700:
• 2x 55-in. (1.4m) TFT-LCD monitor, edge-lit LED
• Resolution: 1920 x 1080 (16:9)
• Contrast ratio: Typical 4000:1
• Viewing angle: +/-178 deg
• Response time: Typical 8 ms
• Brightness: Typical 450 cd/m
2
Cisco TelePresence MX800:
• 70-inch TFT-LCD monitor, edge-lit LED
• Resolution: 1920 x 1080 (16:9)
• Contrast ratio: Typical 4000:1
• Viewing angle: +/- 176 deg
• Response time: Typical 8 ms
• Brightness: 350 cd/m
2
PC and second-source video input
• DVI-I
• Two HDMI (if Dual camera option is installed, only
one HDMI)
• One standard definition (composite or S-video)
Supported PC input resolutions
• SVGA (800 x 600) up to 1080p (1920 x 1080)
Camera overview
• 20x total zoom (10x optical,2x digital zoom)
• Motorized +12.7°/-14.5° tilt, +58°/-90° pan
• 80° horizontal field of view
• 48.8° vertical field of view
• F 1.5
• Resolutions: 1080p60 and 720p60
• Automatic or manual focus, brightness, and white
balance
• Far-end camera control
• Camera control over Ethernet
• Focus distance 3.28 ft (1m) to infinity
Audio system
• 8 balanced microphone inputs with phantom power
• 4 balanced line inputs
• 6 balanced line outputs
• Multichannel loudspeaker array
• Integrated bass speakers
MX700:
• Frequency range: 65 Hz-20 kHz
• Total amplifier power: 400 W
MX800:
• Frequency range: 45 Hz-20 kHz
• Total amplifier power: 200 W
User interface
Cisco TelePresence Touch 10 interface (ref. Touch 10”
DataSheet)
• 10 inch projected capacitive touch screen
• Resolution: 1280 x 800
Language support
• Depends on software version
• English, Arabic, Catalan, Czech, Danish, Dutch,
Finnish, French, German, Hebrew, Hungarian, Italian,
Japanese, Korean, Norwegian, Polish, Portuguese-
Brazilian, Russian, Simplified Chinese, Spanish,
Swedish, Traditional Chinese, Turkish (software
version TC7)
System management
• Support for the Cisco TelePresence Management
Suite (TMS)
• Total management via embedded Telnet, SSH, XML
and SOAP
• Remote software upload via web server, SCP, HTTP
and HTTPS
• One RS-232 for local control and diagnostics
• Support for Cisco TelePresence Touch 10
Directory services
• Support for local directories (Favorites / Local
contacts)
• Corporate directory (through CUCM and Cisco TMS)
• Server directory supporting LDAP and H.350
(requires Cisco TMS)
• Call history with received, placed and missed calls
with date and time
Product dimensions and weight
MX700:
• Width: 99.09” in. (251.7 cm)
• Height Freestand: 64.33” in (163.4 cm)
• Height Wallmount: 42.17” in (107.1 cm)
• Depth Freestand: 4.76” in, 36.22” incl. feet (12.1 cm,
92.0 cm incl. feet)
• Depth Wallmount: 5.83” in (14.8 cm)
• Weight Single Camera: Freestand: 339.51 lbs
(154.0 kg)
• Weight Dual Camera: Freestand: 352.73 lbs
(160.0 kg)
• Weight Single Camera: Wallmount: 357.15 lbs
(162.0 kg)
• Weight Dual Camera: Wallmount: 370.38 lbs
(168.0 kg)
MX800:
• Width: 62.83” in. (159.6 cm)
• Height Freestand: 71.69” in (182.1 cm)
• Height Wallmount: 49.52” in (125.8 cm)
• Depth Freestand: 4.76” in, 36.22” incl. feet (12.1 cm,
92.0 cm incl. feet)
• Depth Wallmount: 5.87” in (14.9 cm)
• Weight Single Camera: Freestand: 244.71 lbs
(111.0 kg)
• Weight Dual Camera: Freestand: 257.94 lbs (117.0 kg)
• Weight Single Camera: Wallmount: 240.30 lbs
(109.0 kg)
• Weight Dual Camera: Wallmount: 253.53 lbs
(115.0 kg)
Packaging dimensions and weight
MX700:
• H: 62.20” in. (158.0 cm)
• D: 30.51” in. (77.5 cm)
• W: 61.69” in. (156.7 cm)
• Weight w/Single Camera: 498.2 lbs (226 kg)
• Weight w/Dual Camera: 511.5 lbs (232 kg)
MX800:
• H: 59.06” in. (150 cm)
• D: 26.38” in. (67 cm)
• W: 72.83” in. (185 cm)
• Weight w/Single Camera: 361.6 lbs (164 kg)
• Weight w/Dual Camera: 374.8 lbs (170 kg)
Power
MX700:
• Auto-sensing power supply
• 100-120/200-240 VAC, 50/60 Hz
• 170 W maximum for codec and main camera
• Standby Power Consumption single cam/dual cam:
129 W/140 W
• Average Power Consumption single cam/dual cam:
504 W/525 W
• Max Power Consumption single cam/dual cam:
548 W/573 W
MX800:
• Auto-sensing power supply
• 100-120/200-240 VAC, 50/60 Hz
• 170 W maximum for codec and main camera
• Standby Power Consumption single cam/dual cam:
106 W/118 W
• Average Power Consumption single cam/dual cam:
297 W/324 W
• Max Power Consumption single cam/dual cam:
327 W/355 W
Contents
Introduction
Web interface
System settings
Setting passwords
AppendicesAppendices

Cisco Telepresence MX800 Specifications

General

Pan range	-90 - 60 °
Product type	Video conferencing service management system
Product color	White
Wall mountable	Yes
Tilt angle range	-14 - 12 °
Number of persons	- person(s)
Aspect ratio	16:9
Maximum frame rate	60 fps
Supported video modes	720p, 1080p
Video formats supported	H.261, H.263, H.264, H.265
Resolution at capture speed	1920x1080@60fps
Supported graphics resolutions	352 x 288, 512 x 288, 1024 x 576 (WSVGA), 1024 x 768 (XGA), 1280 x 720 (HD 720), 1280 x 768 (WXGA), 1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA)
Megapixel	- MP
Sensor type	-
Digital zoom	2 x
Optical zoom	10 x
Image sensor size	- \
Closest focusing distance	1 m
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Display diagonal	70 \
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	591 W
Power consumption (typical)	571 W