Cisco Telepresence MX800 - Restarting the System

D15119.02 MX700 and MX800 Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.
55
Cisco TelePresence MX700 and MX800 Administrator Guide
Restarting the system
The system can be shut down or restarted remotely using the
web interface.
Restarting the system
Click Restart TelePresence device... to
restart the system.
It will take a few minutes before
the system is ready for use.
Shutting down the system
Click Shutdown TelePresence device...
to shut down the system.
The system cannot be turned on
again remotely; you must press
its power button physically to
turn it on.
Navigate to: Maintenance > Restart
Contents
Introduction
Web interface
System settings
Setting passwords
Appendices
Web interface