Cisco UCS 6454 User Manual

Figure 8: Sliding the Chassis Into the Rack
Step 5 Stabilize the chassis in the rack by attaching the front rack-mount brackets to the front rack-mounting rails:
a) Insert 2 screws (12-24 or 10-32, depending on rack type) in each the two front rack-mount brackets (using
a total of four screws) and into the threaded holes in the vertical rack-mounting rail.
b) Repeat for the front rack-mount bracket on the other side of the chassis.
Figure 9: Attaching the Chassis to the Rack
Cisco UCS 6454 Fabric Interconnect Hardware Installation Guide
23
Installing the Cisco UCS Fabric Interconnect
Installing the Cisco UCS Chassis in a Cabinet or Rack

Cisco UCS 6454 Specifications

General

Product Type	Fabric Interconnect
Ports	54
USB Ports	1 x USB 2.0
Form Factor	1 RU
Management	Cisco UCS Manager
Port Types	FCoE, FC
Downlink Ports	48 x 10/25 Gbps SFP28
Management Ports	1 x 1 Gbps RJ45
Console Ports	1 x RJ45
Latency	Less than 1 microsecond
Redundancy	Redundant power supplies and fans
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Humidity	5 to 95% relative humidity, noncondensing
Power Supply	650W AC, hot-swappable