Cisco UCS Administration Guide

1-10
Cisco UCS Invicta Scaling System Administration and Configuration Guide, Version 5.0.1.1a
Chapter 1 Overview
Document Roadmap
The remaining sections of this document provide information on each Cisco UCS Invicta Scaling System
menu item and the tasks associated with them (see Table 1-2 on page 1-2).
Figure 1-1 Cisco UCS Invicta Scaling System Device Rear Panel Features
PSU1 PSU2
PCIe 1
PCIe 2
PCIe 3
PCIe 4
PCIe 5
4 98 107 1165
2 3
331826
1
1 Power supplies (two) 7 1-Gb Ethernet dedicated management port
2 PCIe slot on riser 2:
PCIe 5—full-height, 3/4-length, x16 lane)
8 USB 2.0 port
3 PCIe slot on riser 2:
PCIe 4—half-height, 3/4-length, x8 lane)
9 Quad 1-Gb Ethernet ports
(LAN1, LAN2, LAN3, and LAN4)
4 VGA video connector 10 PCIe slots on riser 1:
PCIe 1—full-height, half-length, x8 lane
PCIe 2—full-height, half-length, x16 lane
PCIe 3—full-height, half-length, x8 lane
5 Serial port (RJ-45 connector) 11 Rear Identification button/LED
6 USB port –

Cisco UCS Specifications

General

Processor Options	Intel Xeon Scalable Processors
Memory Capacity	Up to 6 TB
Memory Type	DDR4
Storage Options	NVMe, SSD, HDD
Network Interface	10/25/40/100 Gigabit Ethernet
Form Factor	Blade
Product Type	Server
RAID Levels	0, 1, 5, 6, 10
Networking	Unified Fabric
Virtualization Support	VMware, Microsoft Hyper-V
Form Factors	Blade, Rack