Cisco UCS Administration Guide

Contents
ii
Cisco UCS Invicta Scaling System Administration and Configuration Guide, Version 5.0.1.1a
Delete Bond 3-5
Enable/Disable Bond 3-6
Enable/Disable Fibre Channel Interface 3-6
Create a Virtual Interface 3-6
Create a VLAN 3-7
Configure Devices 3-8
Check Performance 3-8
MPIO Settings 3-8
Volume Group and Node Settings 3-9
Physical Space (Data Reduction) 3-9
Storage Trend (Data Reduction) 3-9
Physical Space Alerts 3-10
iSCSI Settings 3-10
Changing Initiator IP Address Availability 3-10
Error Correction 3-11
Support Settings 3-11
Support Setting Configuration 3-11
System Update 3-13
Uninstall Update 3-14
Shutdown 3-14
Reboot 3-14
Alert Admin 3-14
Address Alert 3-14
CHAPTER 4 LUN Configuration 4-1
The LUNs List 4-1
Create LUN 4-1
Increase LUN Size 4-2
Create Snapshots 4-2
Schedule Snapshot 4-4
Merge Snapshot 4-5
Delete Snapshot 4-5
Check Performance 4-6
Delete LUN 4-7
LUN Mirror 4-7
View LUN Performance Data 4-10
Initiator Groups 4-10
Create an Initiator Group 4-11
Add an Initiator to an Initiator Group 4-11
Map a LUN to an Initiator Group 4-11

Cisco UCS Specifications

General

Processor Options	Intel Xeon Scalable Processors
Memory Capacity	Up to 6 TB
Memory Type	DDR4
Storage Options	NVMe, SSD, HDD
Network Interface	10/25/40/100 Gigabit Ethernet
Form Factor	Blade
Product Type	Server
RAID Levels	0, 1, 5, 6, 10
Networking	Unified Fabric
Virtualization Support	VMware, Microsoft Hyper-V
Form Factors	Blade, Rack