Cisco VG204 Software Configuration Guide

3-6
Cisco VG202 and Cisco VG204 Voice Gateways Software Configuration Guide
OL-16191-01
Chapter 3 Configuring with the Command-Line Interface
Saving Configuration Changes
DETAILED STEPS
Command or Action Purpose
Step 1
enable
Example:
VG# enable
Enters privileged EXEC mode.
Step 2
copy running-config startup-config
Example:
VG# copy running-config startup-config
Saves the configuration changes to NVRAM so that they
are not lost during resets, power cycles, or power
outages.
Step 3
Ctrl-z
Example:
VG# Ctrl-z
Returns to enable mode when you finish configuring the
interfaces.

Cisco VG204 Specifications

General

Number of FXS Ports	4
Voice Codecs	G.711, G.729, G.729a, G.729ab
Operating Temperature	32 to 104°F (0 to 40°C)
Humidity	10% to 90% non-condensing
Network Interface	1 x 10/100 Ethernet
Protocol Support	SCCP, SIP
Power Supply	AC 100-240V, 50-60Hz
Weight	2.2 lbs (1 kg)
Storage Temperature	-20 to 70°C